Behringer BCF2000 with Reaper
Updated by Bryan Smart on 3/25/2012

These notes assume that you're using Klinke's Mackie Control plug in, and BCF Sonar MCU mode (preset 3). Don't bother looking at the overlays that come with the Klinke plug in, as a different overlay is used for the BCF than the standard MCU, and none of his descriptions match. Don't bother downloading the BCF2000 Klinke overlays from the Cockos forums, as they're almost entirely wrong (must be from some out-dated version). Basically, all public docs are wrong. Everything in here I reasoned out through trial and error, and parts of it are probably wrong, too. Blame people that program crap without bothering to make any notes.

Fader zone

Top button row: Press to mute. With upper shift, press to solo. With lower shift, press to go to markers 1 through 8.
Bottom row: Press to select a track. With upper shift, toggle record arm. With lower shift, perform programmable action.

Control zone

The left button in the first row is upper-shift. The left button in the second row is lower-shift.

You can flip the faders (fader/rotary swap) by holding upper-shift with the right button in the second row.

The keys in the 5th row shift/bank the fader group left and right. Press by themselves to bank by 8 tracks at a time. With upper-shift, bank by 1 track at a time. With lower-shift, press bank left to un-do the last action.

The 6th row contains the Back and Forward keys. Press either to move back/forward by bars. Press upper-shift with Back to toggle repeat/loop. Press upper-shift with Forward to toggle the metronome.

The last (7th) row are the Stop and Play keys. Press Play with upper-shift to record.