## Front Panel (Left to Right)

* Line 1 
	- Combo in
	- Gain knob
	- Fantom Power button
	- 0-latency monitoring button

* Line 2
	- Combo in
	- Gain knob
	- Fantom Power button
	- 0-latency monitoring button

* Mix and Lines 3-4
	- 0-latency/Computer Audio  mix knob
	- Line 3-4 0-latency button 

* Display

* Monitors volume knob

* Headphones volume knob

* Headphone jack

## Back Panel (left to right from front)

Left connectors are upper, Right connectors lower

* Lines 3-4 line in quarter inch sockets
* Lines 1-2 quarter inch monitor outs (variable volume)
* Lines 3-4 quarter inch Line out
* Lines 1-2 RCA monitor outs (variable volume)
* Lines 3-4 RCA Line out
* USB C connector
* Midi out
* Midi in
* Kensington lock slot
* power switch (up is on)

## Start-up modes

* Reset to factory by holding monitor 1 and powering on

* Set to firmware update mode by holding monitors 1 and 2 while powering on.

* return to normal operation by powering off and on.

* Holding monitor 1 or monitor 2 button for more than a second switches to left-right stereo instead of mono for each channel.